A DVD Driver is a piece of software which enables communication between your DVD Drive and your laptop or PC. So it is quite understood that malfunctioning of DVD Drivers may lead to several issues such as your DVD Drive does not read or write or not recognized by Windows. So it is imperative to download/install/update these drivers.

Well here in this guide we will discuss about several methods on how to download/install/update DVD Driver for Windows 10.

But before discussing the same we will talk about how to now if there is a driver related issue. You can manually check the integrity of your DVD driver by following the below mention guidelines:

 Step 1: On your keyboard press Win + X keys to launch Device Manager> then double-click DVD/CD-ROM drivers to expand the category

Step 2: If there’s any issues with the driver, you will either see a yellow triangle with a black exclamation point (!) inside or will see a red “X”. This indicates the device is physically available however the driver is installed due to which it is disabled.

In such cases updating the driver is the best solution to resolve the issue.

DVD Driver for Windows 10: Download/ Install/Update

Method 1: Update the DVD/CD driver through Manufacturer Website

If you have technical skills and you are capable enough to download DVD Driver for Windows, then good and well. Follow the below mention steps to proceed:

Step 1: First of all visit Manufacturer’s website> then search for Downloads or the “Drivers & Support” section

Step 2: Now look for the Model number of the peripheral you are using> then download and install the latest driver as per the OS and bit you using.

Step 3: Double-Click on the setup file and then follow the on-screen instructions to install the update> finally Restart your computer to apply the changes.

Method 2: Update CD/DVD ROM Driver through Device Manager

You can also use Device Manager for downloading DVD Player Driver for Windows 10.  To do so follow the below mention guidelines:

Step 1: To launch Device Manager press Windows + X keys together> then expand the DVD/CD-ROM section by double-clicking on it> then right-click your device

Step 2: Update the driver> then click Search Automatically for drivers

Step 3: Now wait for the Windows to look for an available update. If available it will be automatically installed and updated in the background.

Step 4: Finally Restart PC to apply changes.

Method 3: Go for Driver Tool

If you found the above mentioned methods complicated then you can simply go for this option. This option neither demands skill nor patience. All you need to do is just click on the below mention link. And your driver will be updated to the latest version which will resolve all the driver related issues of your PC.

⇑Get Driver Tool from Here⇓

But several times it happens when the user is having an up to date drivers but still they face several issues such as DVD Driver is not detected in Windows 10. And if we talk about the reason then there are several factors like inappropriately configured settings related to CD/DVD in BIOS, or incorrect Windows Settings, Corrupted Registry and malfunctioning of hardware.

How to fix DVD Driver is not detected/Showing in Windows 10

Method 1: Run SFC Scan

In this method we suggest you to run a SFC Scan to repair corrupted system files and to proceed with the method follow the follow the below mention guidelines:

Step 1: Firstly open Command Prompt as an Administrator > then type in sfc/scannow under the command prompt and press Enter key

Step 2: Wait till the process gets completed and once done then Restart your System

Method 2: Use DISM

If the above mention method didn’t works for you then we suggest you to use DISM to resolve the issue.

Here’s how:

Step 1: Open the Command Prompt as an Administrator > under the command line, copy-paste the below mention lines and press Enter after each:



Step 2: Now wait until the procedure gets completed (it might take 10 minutes)> then Restart your System

Method 3: Load BIOS defaults

It’s quite possible that your BIOS simply doesn’t recognize the DVD drive. So it is best to simply load the BIOS defaults.

Step 1: Enter BIOS Settings of your PC (If you are not sure how, Google your laptop or PC model)

Step 2: Then go to the Exit tab and select Optimal Defaults

Step 3: Press Enter key> then press F10 to save the changes & start your PC again.

Method 4: Use the Hardware Troubleshooter

If you are still struggling with DVD Driver is not detected issue then we suggest you to use the Hardware Troubleshooter.

To do so follow the below mention guidelines:

Step 1: Open the Settings> Go to Updates & Security > Troubleshooting >now click Hardware & Devices and go to Run the Troubleshooter

Step 2: Follow the on screen instructions and let the troubleshooter finish the process> finally restart your process.

Method 5: Create New Registry

Several users have claimed that modifying the registry resolves their issue but don’t forget to create backup of your registry, in case anything goes wrong.

Once done then follow the below mention guidelines:

Step 1: Press Windows + R keys then type in regedit and then press Enter key> Once  the Registry Editor opens, navigate to the following key in the left panel:


Step 2: Then right-click atapi and select New>key

Step 3: Enter Controller0 as the name of the new key> then select Controller0 and in the right pane right-click the empty space & select New > DWORD (32-bit) Value

Step 4: Now enter EnumDevice1 as the name of new DWORD > then double-click EnumDevice1 DWORD to open its Properties

  • Enter 1 in Value data input field and click OK to save changes.

Some users reported that you might have to create another controller key if you have more than one DVD Drive on your system.

To do so repeat the same steps from above, but instead of calling the new key Controller0, make sure to name it Controller1.

If you don’t want to use Registry Editor, you can do the same thing by using Command Prompt. To do so follow the below mention steps:

Step 1: Press Windows + X keys and select Command Prompt (Admin) from the menu> once the command prompt opens enter the following line and press Enter to run it.

reg.exe add “HKLMSystemCurrentControlSetServicesatapiController0” /f /v EnumDevice1 /t REG_DWORD /d 0x00000001

Step 2: Now close the command prompt and Restart your PC.

Well that’s all about DVD Driver for Windows 10 download. We really hope that this article was helpful for you and you liked it.