Here in this guide we are going to discuss one of the installation errors and that is Error 0x80300024 when installing Windows 10. So if you are also looking for a troubleshooting guide for the same then without any further ado let’s gets started.

As we have earlier mentioned that it is an installation error so it’s quite possible that one will face this error while trying to install any version of the Windows Operating System on your PC or sometimes while upgrading the computer to Windows 10.

According to the victims the error gets prompted on the user screen with an error message which says: “we couldn’t install Windows in the location you chose. Please check your media drive”

Or

“Windows is unable to install to the selected location, Error 0x80300024”

Well errors are always annoying but the errors with an error message helps the users a lot because it gives the user a clue that about the flaw. If you read the error message two or three times you will came to know that the error is very much related with the hard drive. And we would also like to mention here that this error is also a big question mark on the integrity of your hardware/software.

In order to provide our users the best solutions we researched a lot about the error and after researching a lot we have collected some piece of data which will help you in the better understanding the error.

Why I am having Error 0x80300024 when installing on Windows 10

  • Corrupted/Damaged Hard Drive
  • Using Wrong USB Port to plug-in installation Media
  • Malfunctioning of hardware/software
  • Incompatibility between the hard drive and the driver application
  • The hard drive on which you are trying to install Windows won’t have sufficient space.
  • Unnecessary hard drives are plugged in your system
  • If your system does not meets the minimum requirements to install a particular version of Windows on your PC.
  • Corrupted/Damaged Windows Installation Media

How to Resolve Error 0x80300024 when installing Windows 10

Method 1: Free Up Disk Space

We have already mentioned that you are likely to face the current error if you don’t have enough space on your disk. So in such case all you need to do is just clear up the space on the hard disk drive in order to hold the Windows Installation files. To do the same delete the temporary files and unwanted or unnecessary files/folders. It will make room on your hard drive so that you can install the Windows Update without any issues.

Method 2: Ensure that the target drive is at the top of your PC’s boot order

Another major reason for facing the above mention error is if the hard drive you are trying to install Windows on is not at the top of your PC’s boot order.

On Startup, every PC has an order of sources its tries to boot the OS from and this is configured through the average computer’s BIOS.

In order to tackle this situation, you need to make sure that that targeted hard drive is at the top of your PC’s boot order:

Step 1: First of all start your computer first>on the first screen that you see when your PC boots up, you will get instructions to press a specific key on your keyboard like Delete, F1, F2- to enter your computer’s BIOS/Setup. So Press the key specified to enter the BIOS.

Step 2: Bow in the BIOS locate your PC’s boot order/configuration. In most cases, the boot order is located in the BIOS’s Boot tab.

Step 3: Now adjust the boot order so that the hard drive that you are trying to install Windows is at the very top>While in the BIOS, also make sure that you have selected “UEFI” as the boot mode. And the option should be in the “Boot” section of BIOS.

Step 4: Finally Exit the Computer’s BIOS but don’t forget to save the changes that you have made to it before doing so. Once done then Restart your PC and see if the issue resolved or not.

Method 3: Remove unnecessary hard drives

Several Users have claimed that they managed to get past the error just by removing the unnecessary hard drives. Unnecessary drives create issues while installation of the Windows Updates. So removing it may help you.

Method 4: Try different USB Port

In this method we suggest you to switch to different USB Port-try to use USB 2.0 Port if you are using the USB 3.0 before.

Tip: This method is only available for users who install Windows with USB Stick.

Method 5: Check Connection of the Accessories

In this method we suggest you to check if all the necessary accessories are properly connected or not. So make sure that the installation and installation location is stable.

And if the cable that is connecting these two have any scratch then it may interrupt with the installation of the Window. So kindly make sure that the cables have no such scratches. Additionally, check whether is enough space on the installation location location or not.

Method 6: Use DiskPart

You are likely to face the above mention error due to corrupted partition table of the hard drive. Follow the below mention steps to run the DiskPart:

Step 1: First of all find out and note the System partition while setup lists the partition>Now press Shift + F10 key & type DiskPart

Step 2: After that list down all the partitions, type List Disk>then type Select Disk 1 (Replace “1” with the number partition number)

Step 3: Finally clean and then type Enter key

Method 7: Format the Installation Location

If you are still struggling with Error 0x80300024 when installing Windows 10, so it is suggested to format the installation partition before installing Windows.

Here’s how:

Step 1: First of all insert bootable Windows Installation Media into the computer & reboot it>Now in the BIOS screen, select to boot using insert bootable Windows Installation media

Step 2: After that configure your keyboard layout, language and other preferences.

Step 3: Now select the custom (Advanced) option when you asked to select what kind of the Windows installation you want.

Step 4: In the next page, tap on the Drive Options (Advanced)

Step 5: Select the hard drive partition where you desire to install Windows> tap on the Format option

Step 6: Then confirm your action and wait until the hard drive partition is completely formatted>tap on the Next button

Once done then you will see that the hard drive is turned into the unallocated space and after that create a partition and try to install Windows on it.

Method 8: Go for a PC Repair Tool

Sometimes only manual methods are not enough to get past such kinds of Windows error. In some cases you need an expert to scan your repositories and fix the detected error. Considering this situation we suggest you to a PC Repair Tool which will not only resolve the above mention error but will also fix other malfunctioning of your PC.

⇑Get PC Repair Tool⇓

Method 9: Replace the Hard Drive

If you only want manual methods and none of the above mentioned manual methods works for you then we suggest you to replace your hard drive with new one. And once you have replaced the drive try to install Windows.

Well that’s all about Error 0x80300024 when installing Windows 10.We really hope that this blog was good enough to resolve your error.