Table of Contents
VPN Software protects your information by masking your device’s IP address. This software encrypts your data & routed it through secure networks to servers in far away states or other countries. A VPN hides your online identity, allowing you to browse the internet anonymously.
But a lot of users have claimed Forticlient VPN connected but not working issue which is quite annoying and after researching a lot about the issue we found that there are so many factors that are responsible for throwing Forticlient VPN connected but not Internet issue such as local settings interfering, server down errors and VPN DNS issues. But don’t worry we have collected some effective methods to tackle the situation. So without any further delay let’s get started with the discussion.
Try these fixes for Forticlient VPN connected but not working
Method 1: Use Command Prompt as an Administrator
In the very first method we suggest you to use command prompt as an administrator. To do so follow the below mention instructions:
Step 1: Click Start and type in CMD> then right-click Command prompt from the results & select Run as an Administrator
Step 2: Under the black screen, type these two commands: ipconfig /release and then ipconfig /renew and then press Enter after each
Method 2: Check the Ethernet adapter option Settings
If the first method didn’t works for you then w suggest you to check the Ethernet Adapter Option Settings.
Step 1: Right-click the Start Menu & select Network Connections > On the left-hand side click Ethernet
Step 2: Then click Change Adapter Options > Right-click the network connections you are using & select Properties
Step 3: After that highlight Internet Protocol Version 4 (TCP/IPv4) and click Properties
Step 4: Now select Use the following DNS server addresses and type OpenDNS addresses
(188.8.131.52 and 184.108.40.206) in the Preferred DNS Server and Alternate DNS Server fields.
Step 5: Tap OK, then Close, then Close finally close the Network Connections Window> After that flush your DNS, here we recommend you flush both your DNS resolver cache and your web browser’s cache
Method 3: Check your underlying connection
To do so first of all disconnect from your VPN connection and try to access the internet, if you are able to access the Internet, connect to your VPN and move to the next step.
But if you cannot access the internet, then there is an issue with your internet. In such case you need to reboot your device and check your network settings.
Method 4: Connect to a different server location
In this method we suggest you to select a different VPN server location and connect to it. If you access the internet when connected to a different server location then there may be a temporary issue with the server location you originally selected.
Method 5: Change your VPN Protocol
Through VPN Protocol your device connects to a VPN Server. If your VPN uses the UDP protocol by default, this may be blocked in some countries.
For Optimal Performance, you need to choose the protocols below in the following order:
Now open your VPN’s options or settings & select the protocol from the list.
Method 6: Adjust your Proxy Settings
You can also adjust the Proxy Settings in order to resolve the Forticlient VPN connected but not Internet issue.
Step 1: Now from the Tools or gear menu> select Internet Options> In the Connections tab, click LAN Settings
Step 2: Then Uncheck all the displayed options except automatically detect Settings > tap on OK and then OK
Step 3: Close your browser and then open it again.
Method 7: Change your DNS Server Configuration
In this method we suggest you to change your DNS Server Configuration and to do so follow the below mention guidelines:
Open Network Connection Settings
Step 1: Firstly right-click Start and select Run> then type in ncpa.cpl and click on OK
Step 2: Under the Network Connections window, find your usual connection, either LAN or Wireless Network Connection
Step 3: Now right-click the connection and select Properties
Set the DNS Server Addresses
Step 1: Double-click Internet Protocol Version 4 (IPv4) or just Internet Protocol
Step 2: Select Use the following DNS Server Addresses
Step 3: Now type these Google DNS Server Addresses: Preferred DNS server 220.127.116.11 and Alternate DNS server 18.104.22.168
Step 4: If Google DNS is blocked, try the following:
Neustar DNS Advantage (22.214.171.124 and 126.96.36.199) enter and press OK; Level3 DNS (188.8.131.52 and 184.108.40.206) enter and press OK
Once done set your VPN’s DNS Setting, and flush old DNS entries as described in the above mention solution.
Method 8: Flush the DNS Cache
If you are still struggling with Forticlient VPN connected but not working then we suggest you to flush the DNS Cache.
Step 1: Click Start> Select All Apps> then click Accessories
Step 2: After that click Start and type CMD and then right-click Command Prompt, select Run as Administrator
Step 3: Type ipconfig /flushdns and press Enter. You will get a confirmation saying Windows IP Configuration Successfully flushed the DNS Resolver Cache.
Method 9: Change your VPN
If none of the above mentioned methods works for you then we suggest you to change your VPN. Changing the VPN is the last choice option you have. So we suggest you to change your VPN. We recommend you one of the most reliable VPNs and that is NordVPN.
Well that’s all about Forticlient VPN connected but not working. If you liked the blog then keep visiting the site for more useful articles.