Table of Contents
This device is disabled. (Code 22)
Click Enable Device to enable this device.
So many Windows users are irate with the above mention error and as per the reports this is one of the several Device Manager Error codes. And it occurs when a hardware device is disabled in the Device Manager. But in most of the cases, it simply means that the device was manually disabled but the user must check if the Windows is forced to disable the device due to lack of system resources or malfunctioning of the device. And when the users get prompted with this error code they can’t use the hardware as normal which is the worst thing about this error. So considering the consequences of this highly frustrating error we are here with this blog and if you are also one the victims then stay tunes with us till the end.
Well you have been briefed about the error, so let us waste no further time in digging out the source of the issue and let’s discuss about the troubleshooting methods.
Fixes for This device is disabled (Code 22) Error
Method 1: Reboot your Computer
In the very first method it is suggested to reboot your PC. Restarting the computer may resolve several issues and it also removes glitches in the software. So kindly give a try to this method.
Method 2: Enable your Device Driver
After rebooting your device kindly enable your device driver and to do the same follow the below mention instructions:
Step 1: Press Windows + R keys together to open the Run box>then type in devmgmt.msc and press Enter to access the Device Manager
Step 2: Then expand the category that your device belongs to, right-click your device and select Enable device
Once done then see if the issue resolved or not.
Method 3: Use the System Restore
It is quite possible that a recent change or conflict between a 3rd party service and a native equivalent might be interfering with the state of the device and causing the above mention error. And if you are also in the same situation then use can use System Restore to restore your PC back to a state in which the current conflict was not occurring.
Remember that by default, the System Restore is configured to save regular System Restore snapshots during the important events like the installation of a new driver, the installation of a Windows Update, or the updating of an existing app. If you have not modified the default behaviour of System Restore, you should have plenty of snapshots to choose from.
To proceed with the method follow the below mention steps:
Step 1: Press Win + R Keys together to open Run dialog box then type in ‘rstrui.exe’ in the text box and press Enter key to open up the System Restore Utility.
Step 2: Once you are under the System Restore, start by selecting the Choose a different restore point before clicking Next
Step 3: In the next step, start by check the box related with Show More Restore Point. Next select a Restore Snapshot that’s dated before the apparition of the above mention error code. And once the correct snapshot is enabled click on Next
Step 4: Now at the final screen of System Restore, click on Finish and wait for the utility to enforce the older restore snapshots
Method 4: Clear the CMOS Battery/Memory Chip
You are likely to face the above mention error because of the corrupted cached data that’s being maintained by the CMOS battery/Memory Chip in relation to the device that is malfunctioning. And you can also temporarily remove CMOS battery or memory chip to clear the data.
To do so follow the below mention instructions:
Step 1: First of all start by running your PC off and then unplug it from the power source that’s it currently connected to.
Step 2: Then equip yourself with a static wrist band in order to ground yourself to the frame of the computer and prevent accidental damage to your system components produced by static electrical energy.
Step 3: Now remove the side cover of your PC to get an overview of your motherboard. Once you see it use your fingernail or another non-conductive screwdriver to remove the CMOS battery or memory chip (depending on the case)
Step 4: Once you manage to remove the battery, wait for a full minute before plugging it back into place>Put the back cover back on, plug your PC back to a power source, start it and allow it to boot normally.
Step 5: Once the startup sequence is done, check if the issue resolved or not.
Method 5: Uninstall your Device Driver
In this method we suggest you to uninstall the device driver and to do the same follow the below mention instructions:
Step 1: In the Device Manager, right-click your device and select Uninstall device
Step 2: Finally Restart your computer and your Windows will automatically reinstall the driver for your device.
Method 6: Update the Device Driver
If you are still struggling with This device is disabled (Code 22) Error then kindly update your device driver to the latest version. It is one of the most effective methods to resolve suck kinds if errors. So without any further ado kindly follow the below mention instructions to update your drivers:
Step 1: On your keyboard press Windows + R keys together to open a Run dialog box then type in ‘devmgmt.msc’ in the text box and press Enter key to open Device Manager
Step 2: In the Device Manager, scroll down through the list of devices and right-click on the listing that is showing this error. Then from the context menu that’s just appeared, tap on the Properties
Step 3: In the Properties screen, access the Driver tab from the menu at the top and click on the Update Driver button
Step 4: Here click on Search Automatically for Updated Driver Software
Step 5: Once done then wait till the process gets completed. If a new driver version is found then follow the on-screen prompts to install the newer driver version on your PC and finally reboot your system and see if the issue resolved or not.
But sometimes your PC fails to search the most compatible drivers then in such scenario we highly recommend you an automatic Driver Tool to update your drivers without any hassle.
That’s all. We hope that this blog was helpful for you and if you liked the blog then keep visiting the site for more useful articles.